31
INSTALLING THE ANTENNA
RF Cable Connections
Ensure that the power switch is off during the installation period and all the cables
are connected properly between the antenna control unit and the power switch box.
Using the tie wraps and clips inside the radome, secure the RF cables connected to
the power switch box. When all the hardware and cables have been installed, turn
on the power switch.
Cable Connections on
Power Switch Box
(8W BUC)
Cable Connections on
Power Switch Box
(4W BUC)
Modem Tx Cable
(From Modem)
Power Switch
Power Switch LED Power Switch
LED Power Switch
ACU Rx Cable
(From ACU)
ACU Tx Cable
(From ACU)
ACU Rx Cable
(From ACU)
Rotary Rx Cable
(From Antenna)
Rotary Rx Cable
(From Antenna)
Rotary Tx Cable
(From Antenna)
LED Lamp
LED Lamp
Rotary Tx Cable
(From Antenna)
Antenna
Power Cable
(From Antenna)
Antenna
Power Cable
(From Antenna)
BUC
Power Cable
(From Antenna)
To Next Page
Loading...