v80G – Marine Satellite Communication System
32
WARNING: The elevation and cross-level motor brakes prevent dish damage while the
antenna is in power off mode. However, Intellian strongly recommends to restrain the
antenna pedestal properly while underway when power is removed from the antenna.
The normal operating condition for the v80G is to remain powered up at all times.
Note: Make sure to use the Intellian supplied bolts from the accessory box when
you reinstall the top radome. Apply Loctite #262 or equivalent to the bolt thread,
and fasten it to a torque setting of 3.5Nm.
Reinstall the top radome.
M6 Flat Washer
M6 Spring Washer
M6 Hex Wrench Bolt
To Next Page
Loading...
General