*Specifications subject to change without notice
NOTE:
NTEP = Legal for trade (6000e)
3. KEYBOARD LAYOUT AND DESCRIPTION
Press this key to turn scale off
1. Press this key to turn scale on or set weight to zero
2. Press and hold this key to turn backlight on/off
Press this key to switch weighing unit from metric to imperial (when this
unit is enabled) and to piece counting
Press this key to tare off the weight of a container
Press this key to save the weighing result to memory
1. Press this key to recall total accumulated weighing result from
memory
2. Press this key in piece counting mode for sampling
Press MR and Tare keys together to clear total accumulated weighing
result from memory.
These indicators notify the user the weighing range of the loads which is
being placed on the platter.
To Next Page
Loading...
