Intelligent Weighing Technology AGS Series User Manual

11
Weight unit
It indicates the weight unit which the scale is currently measuring.
12
NET INDICATOR
This indicator appears to indicate the tare function is in operation and
weight displayed is net weight
13
ZERO
INDICATOR
This indicator appears to indicate a zero weight status
14
BATTERY LEVEL
INDICATOR
This indicator shows the battery level or charging status
15
M+ INDICATOR
This indicator appears when weight accumulation is operational
4. INITIAL SETUP
PLACING THE SCALE
In order to obtain an accurate weighing result, the scale must be placed on a strong and level
surface.
If required, adjust the adjustable feet underneath the scale to obtain a level position. Refer to the
bubble indicator for leveling condition.
INTERNAL SETTING
● Press and hold TARE and press ON/OFF, display shows F1
● Use TARE (next) or M+ (previous) to scroll through the internal setting menu, and press
MODE to enter the setting.
● Use MODE in sub-setting menu to scroll through available options. Press TARE key to
confirm and exit.
● Press ZERO in the function selection screen to SAVE and restart.
CAUTION: BEFORE LEAVING THE INTERNAL SETTING, ALL CHANGES MUST BE SAVED OTHERWISE
THE SCALE WILL STILL FUNCTION UNDER THE OLD SETTING.
F0. Auto zero tracking
This function helps remove unwanted display output within a defined division range when
returning to zero. (Auto Zero Tracking Range = X * 0.5d)
Zero 0 -> Zero 1 -> Zero 2 -> Zero 3 -> Zero 4

Intelligent Weighing Technology AGS Series Specifications

General

Brand	Intelligent Weighing Technology
Model	AGS Series
Category	Scales
Language	English