To Next Page

To Previous Page

- 109 -

8: Developer Information

MPEG4/Motion-JPEG (VGA) Cameras running firmware

1.6.16.03 and older.

Direct Image Access

You can access the image using the URL below:

http://camera_ip/jpg/image.jpg

Motion-JPEG Stream

You can access the image using the URL below:

http://camera_ip:8070/video.mjpeg

Or:

http://username:password@camera_ip:8070/video.mjpeg

MPEG4 Stream

You can access the image using the URL below:

http://camera_ip:8090/video.mp4

http://username:password@camera_ip:8090/video.mp4

Via RTSP:

rtsp://camera_ip:554/video.mjpeg

rtsp://username:password@camera_ip:554/video.mp4

3GPP Stream

Via RTSP:

rtsp://camera_ip:554/video.3gp

rtsp://username:password@camera_ip:554/video.3gp

H.264 Megapixel Cameras and VGA models running firmware V

1.6.16.05 and newer.

The individual streams can be found under the following URLs:

rtsp://camera_ip:554/video.mp4

rtsp://camera_ip:554/video.h264

rtsp://camera_ip:554/video.mjpg

rtsp://camera_ip:554/video.3gp

http://camera_ip:80/video.mjpg

The ports can be adjusted in the camera settings, so be sure that you use the

correct port. The default ports are shown above.

Intellinet NFC30-IRWG User Manual

Other manuals for Intellinet NFC30-IRWG