9
Timer off only:
1.Press "TIME OFF" button, it display "SET" on LCD,
and display "H" and ON, it is waiting for timer on setting.
2.Press "TIME OFF" button repeatedly to adjust time setting.
3.If press this button and hold on, the time will increase at
0.5h, after 10h, it increase at 1h.
4.After setting 0.5 second, the wire controller send timer off
information, it is finished.
TIMER ON AND TIMER OFF BOTH
1.Set timer on time as the corresponding step1 and 2.
2.Set timer off time as the corresponding step1 and 2.
3.Timer off time must be longer than timer on time.
4.0.5 second after setting,the wire controller send
information ˈthe setting is finished.
1.EMI and EMC comply to CE
CHANGE TIMER
If there is a need of changing timer time, press corres-
ponding button to revise it. If concel timer, change timer
time to 0.0.
Note:the timer time is relative time,that is delay after setting
time(i,e: setting time is 8:05 A,M). So when timer is set,
the standard time can not be adjusted.
TECHNICAL INDICATION AND REQUIREMENT
To Previous Page
Loading...
Need help?
General
