6
Function,just set it to "0.0" .
3. Timer off button: Press this button, timer off function is
active. Then every press, the time increase 0.5h, after
10h, 1h increasement after each press. If cancel this
function, just set it to "0.0" .
4 . Economy operation button:press this button,the indoor
unit operates in economy mode, press again, exit this
mode (it may be ineffective for some models)
5. Follow me button:When under cool,heat and auto mode,
press this button, follow me function is active. Press
again,this function is ineffective.
6. Turbo button :If press this button in cooling mode, the
fan speed will increase (available to some model with
powerful function). If press this button in heatmode,
electrical heater function become ineffective.
7. Reset button(hidden): Use a 1mm stick to press in the
little hole , then the current setting is canceled . The
wire controller enter into original state.
8. ON/OFF button:When in off state, press this button, the
indicator is on, the wire controller enter into on state,
and send setting information to in door Pcb . When in
on state,press this button,the indicator is off,and send
instruction.If timer on or timer off has been set,it concel
this setting then send instruction to stop the machine.
9 . Fan speed button: press this button consecutively, the
fan speed will circle as follow:
To Next Page
Loading...
Need help?
General
