Intenso Memory 2 Move Pro - Interface

EN- 6
8. PRODUCT VIEW
9. INTERFACE
9.1 RJ45 WAN PORT
A. Router Mode. “Memory 2 Move Pro” will serve as router. With the built-in DHCP
function, it can assign IP address to connect devices through Wi-Fi.
B. Bridge Mode：Allows to access another existing network.
9.2 MICRO USB 3.0 INTERFACE
The built-in USB 3.0 port allows for fast data transfer and can charge the internal
battery when the Memory 2 Move Pro is connected to a computer or power adapter.
To connect the Memory 2 Move Pro to the PC, turn off the device and then connect it
to the PC.