Intenso WPD10000 - Operating Conditions; Technical Data

Please do not use water or chemical soluons to clean the device. Please use only a dry cloth for
this purpose.
Do not try to repair the device yourself. The guarantee expires in this case.
Do not use the device when it shows visible damage or has become moist.
The device develops warmth when in use, this is normal. Do not cover the device when this is
in use.
WARNING! Hot surface!
Holding the device for longer periods when in use can result in the
surface becoming hot, causing skin injuries.
When using the device, avoid holding it for too long, especially in areas
which become very hot. Do not carry the device directly on your body.
The device can be touched for longer periods aer it has cooled down.
OPERATING CONDITIONS
Operate the device at 0 to 35 degrees Celsius and a maximum humidity of 85% (for a short me).
If you do not use your device for a longer period, store it at between -10 and 45 degrees Celsius
at max. 90 % relave humidity (for a short me) and charge this every three months to maintain
full capacity.
TECHNICAL DATA
Dimensions: 157 x 77,5 x 13,8 mm
Power consumpon (Input): 5V - 3A
Power Delivery: 5V - 3A, 9V - 2A, 12V - 1.5A
Charging current delivery (Output): USB A: 5V - 3A shared (each 2.4 max.)
USB A QC: 9V -2A, 12V -1.5A
Type C: 5V - 3A max.
Type C QC/PD: 9V - 2A, 12V -1.5A
Qi Version: 1.2.4
Frequency band: 125.8 - 129.49 kHz
Max. rediated power: 10 wa
Internal baery: 10000 mAh / 3.7 V lithium polymer baery
Status display: 4 LED lights
Integrated overcharge protecon / discharge
protecon / overvoltage protecon / short
circuit fuse:
Yes
EN - Page 6 of 8 EN - Page 7 of 8