7
PC-9335AD
STEREO DOUBLE CASSETTE DECK
13. REC MUTE
Depressing this button will create a 4-second blank segment (for AMS) and then end the recording. Does not
apply when using the dubbing function.
14. RECORDING LEVEL CONTROL
This control determines the recording input signal level.
15. OUTPUT LEVEL
This control determines the output signal level of the Variable Output.
16. CASSETTE DOOR
It opens and closes smoothly with gear damper.
17. REVERSE BUTTON (◀)
Press to playback/record side one of the cassette. Deck A is capable of playback only, Deck B is capable of
playback or record. The direction of tape travel and Deck selection will be indicated in the display screen.
18. STOP BUTTON (■)
Depress this button to stop all functions.
19. FORWARD BUTTON (▶)
Press to play/record side one of the cassette. Deck A is capable of playback only, Deck B is capable of
playback or record. The direction of tape travel and Deck selection will be indicated in the display screen.
20. REWIND BUTTON (◀◀ AMS)
Depress this button to prepare to record. The deck will remain in record-pause mode until the play button is
selected to begin the recording or the stop button is depressed to cancel the recording. The record indicator in
the display screen will indicate the record button has been depressed. Both tape direction indicators will flash
in the display screen while in the record-pause mode.
21. FAST-FORWARD BUTTON (AMS ▶▶)
Depress this button to fast wind the tape in the forward direction to the closest section of the cassette tape that
has a minimum of 4 seconds of silence. The Automatic Music Search feature AMS may cause the tape to stop
fast-winding during a quiet section within a program or to fast-wind past a program that is preceded by less
than 4 seconds of silence.
22. HEADPHONE JACK
This jack is for the connection of stereo headphones. The signal level (volume) is controlled by the output
signal level control.
23. POWER SWITCH
The position of this switch determines whether the power is ON or OFF. The switch will illuminate to indicate
the power is ON.
To Next Page
Loading...