PROGRAM TIMER
12
PW-642
8. Memory Copy
This function is used when copying reservations to other weekday.
1) Setting starts if pressing the COPY button.
2) The preceding weekday of indications is the original weekday and the subsiding weekday is a weekday to
be copied.
3) When the preceding original weekday flashes, select the desiring weekday with the DOWN/UP button or
DAY button.
4) If pressing the COPY button again, the subsiding weekday to be copied flashes, and select the desiring
weekday with the DOWN/UP button or DAY button.
5) COPY is executed if pressing the ENTER button after setting.
9. Delete
Function to delete reserved contents.
1) Delete of specific time reservation information
- Delete contents to delete during reservation contents checking and then press the DELETEE button.
- Selected contents are deleted if pressing the ENTER button.
2) Delete of reservation information by weekday
- Press the DELETE button in the STANDBY button to convert to relevant mode.
- Select weekday by pressing the DAY button.
- Pressing the ENTER button enables to delete all contents of the selected weekday if pressing the button.
3) Delete of all reservation information
- Pressing the DELETE button lengthily in the STANDY mode to convert to the relevant mode.
- All reservation information are deleted if pressing the ENTER button.
10. AC Power Output Time Adjustment
This is function used to previously transmit output of AC OUTLET and REMOVE OUTPUT by setting time before
reservation broadcasting is transmitted.
This function can be used without delay when reservation broadcasting is output by previously operating the unit
connected for broadcasting.
HOUR/MIN.
To Next Page
Loading...
Need help?
General
