R-150/R-300/R-500 Reference Series Amplifier
Specifications
Rated Output (RMS)
R-150 R-300 R-500
Stereo 8Ω, 1kHz (per channel) 50W 100W 170W
Stereo 4Ω, 1kHz (per channel) 75W 100W 250W
Bridged Mono 8Ω, 1kHz 150W 300W 500W
Frequency Response ( ± 0.5dB) 20Hz-50kHz
Input Sensitivity 0.775V
Input Impedance 10k (balanced)
T.H.D < 0.03%
S/N -105dB
Damping Factor > 100
Slew Rate ± 30V/µ sec.
Protection Switch On Delay, Thermal,
DC Fault, PC Limiter
GENERAL
Power Source AC 110V-240V, 50/60Hz,
Power Consumption
R-150 140W
R-300 210W
R-500 330W
Weight
R-150 7.5kg/16.5lb
R-300 8.2kg/18lb
R-500 13.6kg/29.9lb
Dimensions
R-150/R-300 482(W) x 88(H) x 210(D) mm
19(W) x 3.5(H) x 8.3(D) inches
R-500 482(W) x 132(H) x 280(D) mm
19(W) x 5.2(H) x 11(D) inches
Specifications and design subject to change without notice for improvements.
15