Inter-m V-3000 User Manual

PROFESSIONAL POWER AMPLIFIER
7
V-3000/4000
6. CLIP LIMITER SWITCH
The CLIP LIMITER reduces the internal operating level of the amplifier as necessary to insure that signal peaks
do not overdrive the amplifier, causing distortion or damage to the amplifier or loudspeakers. It is
recommended to leave this switched to the “ON” position to reduce distortion and help provide protection to
the loudspeakers.
7. HIGH PASS FILTER SWITCH
Select the switch position that is best suited for your application. The OFF position allows full frequency
range signals to reach the loudspeakers. The 30Hz position reduces the signal amplitude below 30Hz to
conserve power and help protect the loudspeakers. The 50Hz position reduces the signal amplitude below
50Hz to conserve power and help protect the loudspeakers.

Inter-m V-3000 Specifications

General

Brand	Inter-m
Model	V-3000
Category	Amplifier
Language	English