D-0101246-Q – 2022/05
Callisto™ Instructions for Use - US Page 16
2.7 Using with databases
2.7.1 Noah 4
If you are using HIMSA’s Noah4 Of f ice System, the Callisto™ sof tware will install itself automatically in the
menu bar on the Noah4 start page, along with all the other software modules.
2.7.2 Working with OtoAccess®
For further instructions about working with OtoAccess®, please see the OtoAccess® operation manual
2.8 Standalone version
If you do not have Noah on your computer, you can directly launch the software suite as a stand-alone
module. However, you will not be able to save your recordings when using this way of working.
2.9 How to configure an alternative data recovery location
The Callisto™ Suite has a backup location for data to be written in the case that the software is accidentally
terminated or the system crashes. The following location is the default storage f older
C:\ProgramData\Interacoustics\Callisto Suite\, however this can be changed by following the below
instructions.
NOTE:
This feature can be used to change the recovery location when you are working through a database
as well as the standalone save location.
1. G
o to C:\Program Files (x86)\Interacoustics\Callisto Suite
2. In this folder find and launch the executable program titled FolderSetupCallisto.exe
3. The below pop up will appear
4. Using this tool you can specif y the location you wish to store the standalone database or the
recovery data by clicking on the ‘Select Folder’ button and specif ying the desired location.
5. Should you wish to revert the data location to the def ault then simply click on the ‘Restore factory
def ault’ button.
2.10 License
When you receive the product, it already contains the licenses to access the ordered software modules. If
you would like to add additional modules, please contact your dealer.
To Next Page
Loading...
