D-0101246-Q – 2022/05
Callisto™ Instructions for Use - US Page 43
List of Protocols allows you to select a test protocol (def ault or user
def ined) to use in the current test session.
Temporary Setup button allows for making temporary changes to the
selected test protocol. The changes will be valid for the current session
only. Af ter making the changes and returning to the main screen, the
name of the test protocol will be followed by an asterisk (*).
NOTE: Protocols from ANSI and IEC cannot be temporarily
modified.
List of historical sessions accesses historical sessions for
comparison purposes.
Toggle between Lock and Unlock the Selected Session freezes the
current or historical session on the screen for comparison to other
Go to Current Session button brings you back to current session.
Report Editor button opens a separate window f or adding notes to the
current session. Note that af ter saving the session no changes can
added to the report
.
Single frequency button represents an optional manual
test that allows for pre-setting hearing aid gain prior to
HIT.
Place the hearing aid in the ear test box and press the
single f requency button. A 1000 Hz tone will then
appear allowing you to see the exact input and output
of the hearing aid. Press the button again to end the
test.
Normal and reversed coordinate system buttons enable you to
toggle between reversed and normal graph.
Simple view/Advanced view buttons toggle between an advanced
screen view (including the test and fitting prescription inf ormation on
the right hand side) and a simpler view with a larger graph.
To Next Page
Loading...
