D-0101246-Q – 2022/05
Callisto™ Instructions for Use - US Page 53
5. General technical specifications
Callisto™ general technical specifications
Medical CE-mark: The CE-mark in combination with MD symbol indicates that Interacoustics A/S
meets the requirements of the Medical Device Regulation (EU) 2017/745 Annex I
Approval of the quality system is made by TÜV – identification no. 0123.
Safety standards:
IEC 60601-1 2005 + CORR. 1 2006 + CORR. 2 2007 + A1 2012
ANSI/AAMI ES60601-1 2005 + A2 2010 2 A1 2012
CAN/CSA-C22.2 No. 60601-1:14
USB powered, Applied parts type B
IEC 60601-1-2 2014 (4. ed.)
Technical inf ormation is located in the specif ications for the software modules.
Calibration inf ormation and instructions are located in the Service manual.
(recommended
minimum)
2 GHz Intel i3 processor
4GB Ram
2.5 GB available disk space
1024x768 resolution (1280x1024 or higher recommended)
Hardware accelerated DirectX/Direct3D graphics card.
One or more USB ports, version 1.1 or higher.
Windows
®
10 (64 bit)
Noah 4, OtoAccess® and XML compatible.
USB-PC USB B socket f or connection to PC
(compatible with USB 1.1 and later)
21.2 x 12.1 x 4.4 cm / 8.3 x 4.8 x 1.7 inches
0.6 kg / 1.2 lbs (With cradle: 0.8 kg / 1.8 lbs)
USB-powered with an internal “power boost” rechargeable battery and load
balancer.
Average: 300mA (Max: 500mA)
Battery
NP120 3.7V 1700 mAH battery lithium ion 53x35.2x11.
Temperature: 10 – 35°C
Re. Humidity: 15 – 90% Non-condensing
Transport and storage
Transport temperature: -20 – 50°C
Storage temperature: 0 – 50°C
Re. Humidity: 10 – 95% Non-condensing
5.1 Reference equivalent threshold values for transducers and maximum hearing
level settings provided at each test frequency
See Appendix A in English in the back of the manual.
5.2 Pin assignments
See Appendix B in English in the back of the manual.
5.3 Electromagnetic Compatibility (EMC)
See Appendix C in English in the back of the manual.
To Next Page
Loading...
