EasyManua.ls Logo

Interflex IF-57 Series - Cable Types; Recommended Cable Specifications

Default Icon
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Interflex Datensysteme GmbH 5/23
For devices of the series IF-57xx, the flexible patch cable must run through an empty
tube to the installation site when flush-mounted to ensure that the line length can be flexibly adjusted!
9.3 Cable Types
Only use the cable types listed below.
No.
Permissible
Length
Recommended Cable Type
1 230 VAC power supply to optional adapter 3 x NYM 1.5 mm²
2 Low-voltage cable for supplying power to IF-57xx J-Y(ST)Y 4 x 2 x 0.6 mm² or
Flex JZ 3 x 0.75 mm²
3 Ethernet/patch cable to hub/switch 100 m Ethernet twisted pair cable
(Cat5)
4 Ethernet/patch cable with/without PoE hub/switch to
IF-57xx
100 m Ethernet twisted pair cable
(Cat5)
5 Ethernet/patch cable from hub/switch to controller
IF-4070
100 m Ethernet twisted pair cable
Flexible patch cable (Cat5)
6 RS485 BUS 1,200 m J-Y(ST)Y 4x2x 0.6 mm²

Other manuals for Interflex IF-57 Series

Related product manuals