To modify the DHW comfort function:
1. Touch the Domestic Hot Water button 2x
. The set DHW
comfort setting is shown on the le display.
2. Using the Plus and Minus buttons, set the desired DHW
comfort setting (for example, ECO).
3. Touch the Enter button
to confirm (or wait 30 seconds).
A P appears on the right display (all other buttons are
extinguished), which means the setting has been stored.
4. The display returns to the main menu.
The central heating menu has 2 settings and is accessible by
touching the Central Heating symbol
from the main menu.
Via the central heating menu:
► the maximum temperature of the central heating water can
be modified (30°C - 90°C, default setting 80°C)
► the clock program can be set
1
The following buttons will light up:
► The Minus symbol
► The Plus symbol
► The Enter symbol
The Domestic Hot Water symbol and the Service symbol
will be extinguished.
2.3.3 Central heating menu
The le display will light up and the current temperature of the
central heating water will be displayed.
To modify the temperature of the central heating water:
1. Touch the Central Heating button
. The set temperature
of the central heating water is shown on the le display.
2. Using the Plus and Minus buttons, set the desired
temperature (for example, 55°C).
3. Touch the Enter button
to confirm (or wait 30 seconds).
A P appears on the right display (all other buttons are
extinguished), which means the setting has been stored.
4. The display returns to the main menu.
Confirm
Main menu
Domestic hot water
menu
Tap comfort
Main menu
Confirm
Central heating
menu
For the quick supply of domestic hot water, a DHW comfort
function has been built in. This has the following settings:
► P-On
1
:
The DHW comfort function is switched on within the chosen
time blocks. The heat exchanger will maintain temperature
during these time blocks.
► On:
The DHW comfort function is continuously switched on. The
boiler always supplies domestic hot water immediately.
► Eco:
The DHW comfort function of the boiler is self learning. The
boiler will adapt itself to the pattern of use of domestic hot
water. This means that the heat exchanger will not maintain
temperature during the night or with long absences.
► O:
The heat exchanger is not kept warm, as a result of which
the supply of domestic hot water is somewhat delayed. If
there is no need for a quick supply of domestic hot water,
the DHW comfort function can be switched o.
1
Only available if clock program is active.
To activate the clock program please contact your installer.
7
To Next Page
Loading...
Need help?
General