Intergas Xtreme Series User Manual

2.3 Changing settings
When the boiler is wired to a fuse spur and the mains voltage
is present, the display will be turned on. From here, several
settings can be set and/or modified. Switch the boiler on, if
needed. However, to make/change these settings, it is not
necessary to turn on the boiler.
The structure of the settings is built up from various menus that
are accessible via certain buttons (of button combinations).
The following menus are available:
► Main menu
Higher-level menu from which all other menus are
accessible.
► Domestic hot water menu
Menu in which several domestic hot water-related settings
can be set and/or modified.
► Central heating menu
Menu in which several central heating-related settings can
be set and/or modified.
The main menu is accessible by touching the control panel just
above the power LED. The main menu can be requested in a
boiler that is switched on as well as one that is switched o.
The following buttons will light up:
► The domestic hot water symbol
► The central heating symbol
► The Service symbol
2.3.1 Main menu
The domestic hot water menu has 2 settings and is accessible
by touching the Domestic Hot Water symbol from the main
menu.
Via the domestic hot water menu:
► the domestic hot water temperature can be modified
(40°C - 65°C, default setting 55°C)
► the DHW comfort function can be modified
The following buttons will light up:
► The Minus symbol
► The Plus symbol
► The Enter symbol
2.3.2 Domestic hot water menu
The Central Heating symbol will be extinguished.
The le display will light up and will display the current
domestic hot water temperature by tapping on the Domestic
Hot Water symbol . By touching the Domestic Hot Water
symbol again, it alternates between ‘modify domestic hot
water temperature’ and ‘modify DHW comfort function’.
To modify the domestic hot water temperature:
1. Touch the Domestic Hot Water button
. The set
temperature is shown on the le display.
2. Using the Plus and Minus buttons, set the desired
temperature (for example, 60°C).
3. Touch the Enter button
to confirm (or wait 30 seconds).
A P appears on the right display (all other buttons are
extinguished), which means the setting has been stored.
4. The display returns to the main menu.
Main menu
Initial setting
Main menu
Confirm
Domestic hot water
menu
Temperature
6

Intergas Xtreme Series Specifications

General

Brand	Intergas
Model	Xtreme Series
Category	Boiler
Language	English