Chapter 5: Menu reference
154 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
The allowed range is 65 to 1920 minutes.
2.2.2.n.4.5 R. Sensitivity
Use the Receiver Sensitivity menu to decrease the wireless expander sensitivity.
Changing the value from Normal to Low reduces the sensitivity by 6 dB.
After exit from the programming mode the sensitivity returns to Normal.
2.2.2.n.4.6 Expander mode
6 Expander mode
>16 inputs<
Choose one of the following modes for the expander:
• 16 inputs: The expander is fitted with 16 zones.
• 32 inputs: The expander is fitted with 32 zones.
Notes
• 32 inputs mode is only available in the wireless expander with firmware
version 1.13 or newer.
• Zones assigned to inputs 17-32 are not adjacent with those assigned to
inputs 1-16 of the expander. For example, first 16 inputs are assigned to
panel zones 113 to 128, and inputs 17 to 32 are assigned to zones 353
to 368.
2.2.2.n.4.7 Exp version
The Expander version screen is an informational screen with the expander
version data.
2.2.2.n.4.8 Jamm detection
8 Jamm detection
>Enable<
The Jamming detection option must be set to Enable if the wireless expander
must detect and report communication jamming attempts.
2.2.2.n.4.11 Default expander
Reset the wireless expander to the factory settings.
To Next Page
Loading...
Need help?
General
