Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 155
Camera specific options
2.2.2.n.4.9 Pic options
This menu is specific for systems with wireless PIR camera expanders.
See “Using cameras” on page 98 for more details.
2.2.2.n.4.9.1 Pic settings
The menu allows you to configure photo recording options separately for the
following camera event types:
• Burglar alarms
• Fire alarms
• Panic alarms
• Medical alarms
• Tamper alarms
• Faults: Device faults and technical alarms
• Custom type 1: User programmable type 1
• Custom type 2: User programmable type 2
See also “Camera event types” on page 98.
2.2.2.n.4.9.1.1 Burglar settings
Enter the BA settings menu to configure picture settings for burglar alarms.
2.2.2.n.4.9.1.1.1 Pic amount
Set the number of pictures taken after an event of the selected type occurs.
Allowed range is 1 to 30. The delay between pictures is set in “2.2.2.n.4.9.1.1.2
Frame rate” below.
2.2.2.n.4.9.1.1.2 Frame rate
The menu defines a frequency of taking pictures on an event of the selected
type.
The menu is only available if “2.2.2.n.4.9.1.1.1 Pic amount” above value is larger
than 1.
To Next Page
Loading...
Need help?
General
