Chapter 5: Menu reference
156 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
The allowed values are 500 ms, 1 s, 5 s, 15 s, 60 s.
2.2.2.n.4.9.1.1.3 Pic resolution
The option defines resolutions of pictures taken upon an event of the selected
type. The following options are available:
• QVGA: 320 x 240 pixels
• VGA: 640 x 480 pixels
• QVGA and VGA: Two pictures at once, one in low resolution, and one in high.
2.2.2.n.4.9.1.2 Fire settings
2.2.2.n.4.9.1.3 Panic settings
2.2.2.n.4.9.1.4 Medical set.
2.2.2.n.4.9.1.5 Tamper set.
2.2.2.n.4.9.1.6 Fault settings
See “2.2.2.n.4.9.1.1 Burglar settings” on page 155
2.2.2.n.4.9.1.7 Custom type 1
2.2.2.n.4.9.1.8 Custom type 2
Custom types are used with condition filters for camera activation.
See “2.2.2.n.4.9.1.1 Burglar settings” on page 155
2.2.2.n.4.9.2 Show pic mem
Pictures: 12
Left sp for: 123
Free sp: 3,0MB
Total sp: 4,0MB
The informational screen shows a pictures number currently stored in the
wireless PIR camera expander as well as available memory.
2.2.2.n.4.9.3 Pic auto deletion
The value defines whether the pictures stored in the wireless PIR camera
expander will be deleted automatically after a chosen period of time (in days).
The allowed range is 1 to 120 days. 0 or Off mean that pictures are never deleted
automatically. Users must control the available memory and remove pictures
manually.
To Next Page
Loading...
Need help?
General
