Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 185
The following options may be available.
Table 27: Wireless sensor options
Report alarms from both sources
Report alarms from both sources
Door/window sensor,
shock sensor
Control housing tamper alarms
Ignore housing tamper alarms
4.1.n.7.6 Remove RF dev
Select Ok and press Enter to remove the wireless device from the wireless
expander database.
4.2 Areas
The Area menu allows you to configure areas and area groups.
See “Areas” on page 50 in Chapter 3 “System functions” for details.
Each area can be programmed with a number of options, like the area name,
entry and exit times etc. Before going any further, select the area to program.
Area options
4.2.n Select area
Select an area to program.
4.2.n.1 Area name
Every area can be programmed with a name to identify the area.