Chapter 5: Menu reference
184 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
4.1.n.7.2 Sensor type
The screen allows you to view the sensor type. The following sensor types are
available:
Table 26: Wireless sensor types
Passive infrared detector
4.1.n.7.3 Sensor mode
The informational screen allows you to see if the sensor operates in two-zone
mode. The following values are available:
• Single: Single zone sensor.
• Master: The selected zone is the first zone of a two-zone sensor.
• Slave: The selected zone is the second zone of a two-zone sensor.
See “Two-zone RF sensors” on page 96 for more details.
4.1.n.7.4 Supervision
Enables or disables the wireless device supervision. Supervision of all types
becomes active. See “2.2.2.n.4.4 Supervision” on page 153 for more details.
4.1.n.7.5 Sensor opt
4 Sensor opt
>Ignore alarm<
Sensor options depend on the type of the wireless device.
See an appropriate RF device manual for more information on available options.