Chapter 5: Menu reference
196 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
5 Door menu
Use the Door menu to add, edit, or delete doors, door groups, and regions of the
Advisor Advanced system.
5.1 Doors
Use the Door menu to add, edit, or delete doors.
The menu allows you to configure doors of both types, standard and intelligent.
Note: Particular options in this menu are specific for different door types. For
specific options, see:
• “Standard door specific options” on page 204
• “Intelligent door specific options” on page 204
Common door options
5.1.0 Add door
Access the Add door menu option to add a door.
Choose one of the following locations:
• 0: Door. Add a door providing the system address of this door. If the address
is valid, the panel displays the physical door location to confirm.
Select OK to confirm, or Cancel to exit, and then press Enter.
• 1: Panel. Add a standard door providing its number on the control panel.
• 2: DC/LC Exp. Add an intelligent door selecting the door controller, and
entering a number of the door on this door controller.
If the door is created successfully, the following message appears:
To Next Page
Loading...
Need help?
General
