Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 267
9.2.2 Voice mapping
The Voice mapping menu allows you to assign a particular voice message
(0 to 14) to each system event. 0 means that no message is assigned.
The list of events is shown in Appendix A “Advisor Advanced events” on page
311.
9.2.3 Delayed events
The Delayed events menu allows you to set a delay for particular events.
The first menu entry, “0 Delay timer”, allows you to set the global reporting delay
from 0 to 250 sec.
The next menu entries represent the particular events. If the option is On, the
delay is applied.
For the list of events, see Appendix A “Advisor Advanced events” on page 311.
9.3 Path options
The Path options menu allows you to configure options for available transmission
paths.
9.3.n Select path
Select the appropriate transmission path to configure its options.
Available transmission paths depend on the system configuration. By default, the
following transmission paths are available:
• IP
Depending on the hardware configuration, the following transmission paths may
also be available:
• PSTN
• ISDN
• GSM
• TDA74xx
To Next Page
Loading...
Need help?
General
