Chapter 5: Menu reference
266 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
9.1.n.4.1 Type
The Type submenu defines who receives the reports directed to the specified
central station:
• Phone: The report is sent to a specified phone number. Menu “9.1.n.4.2
Phone/User/UG” below configures this phone number.
• User: The report is sent to a specified user’s phone number. This user is
selected via menu “9.1.n.4.2 Phone/User/UG” below.
• User Group: The report is sent to all users that belong to the user group that
is set via menu “9.1.n.4.2 Phone/User/UG” below.
User and user group reporting require the following:
• Users must have their phone numbers set in “3.1.n.7.1 User phone” on page
166.
• The SMS reporting must be enabled for these users. See “3.1.n.7.2 SMS
reporting” on page 166.
• At least one of the user groups must allow these users to receive SMS
reports. See “3.2.n.6 User group options” on page 169).
9.1.n.4.2 Phone/User/UG
This menu depends on the Type value set for the reporting recipient. See menu
“9.1.n.4.1 Type” above for parameters description.
9.2 Event options
1>CS mapping
2 Voice mapping
The Event options menu contains event options.
See “Reporting principles” on page 84 for more details on event reporting.
9.2.1 CS mapping
01>AN Report to
>1234..........<
The CS mapping menu allows you to map reporting events to the specific central
stations.
The list of events is shown in Appendix A “Advisor Advanced events” on page
311.
To Next Page
Loading...
Need help?
General
