Appendix A: Advisor Advanced events
322 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
At least one area is in alarm
At least one area is in exit state
At least one area in area group
is in not Ready To Set state
Table 32: Door controller events
Door open command is active
(to unlock / start shunt)
Unlock output is active to unlock
the door
Unlock output is deactivated to
lock the door
The low security schedule
assigned to the door is valid
The low security schedule is
inhibited
Door is disabled completely
(from keypad or computer)
Two Card access is required at
the "IN" reader
Two Card access is required at
the "OUT" reader