Interlogix DD669 - User Manual

© 2017 UTC Fire & Security Americas Corporation, Inc. 1 / 34 P/N 146249999-5 (ML) • REV E • ISS 13JAN17
DD66X Series Dual Detector Installation Sheet
EN
DA
DE
ES
FI
FR
IT
NL
NO
PL
PT
SV
1
2
3

Interlogix DD669 Specifications

General

Power Supply	9-16 VDC
Current Consumption	12 mA (standby), 18 mA (alarm)
Technology	PIR
Operating Temperature	14°F to 122°F (-10°C to +50°C)
Housing Material	Plastic

Summary

Detector Coverage Patterns

Floor pattern at mounting heights between 2.5 and 3.0 m

Details detection patterns for specific mounting heights, illustrating coverage areas.

Floor pattern at mounting heights above 3.0 m

Illustrates detection patterns for higher mounting heights and their coverage zones.

Installation Procedures

Introduction

Overview of the DD66X/AM Dual/Dual-AM motion sensor family and its technology.

Installation guidelines

General recommendations for optimal detector placement and environmental considerations.

Installing the detector

Step-by-step instructions for mounting the detector and connecting wiring.

Detector Settings and Modes

Setting the detector

Configuration options for detector jumpers and DIP switches.

Remote; self test (AM detectors only)

Procedures for testing the detector's functionality remotely or through self-test.

Walk testing the detector

Instructions for activating and performing a walk test for coverage verification.

Green mode (AM detectors only)

Settings for minimizing microwave radiation exposure by disabling the microwave section.