Need help?Do you have a question about the Interlogix xGenConnect NXG-216N and is the answer not in the manual?
General| Brand | Interlogix |
|---|---|
| Model | xGenConnect NXG-216N |
| Category | Control Panel |
| Language | English |
Lists important warnings and disclaimers for product use and installation.
Details critical warnings regarding system risks and third-party dependencies.
Advises on hazards that could result in injury or loss of life.
Warns about possible equipment damage and how to prevent it.
Details guidelines for complying with EN 50131-3 and EN 50136-2 specifications.
Lists mandatory settings required for EN 50131 Grade 2 regulations.
Provides precautions for installation and programming to ensure EN 50131 compliance.
Explains how the panel monitors communication paths and reports faults.
Lists components certified under EN 50131 and INCERT standards.
Explains the process of enrolling new devices into the system for programming.
Step-by-step instructions for enrolling modules via keypad or software.
Describes how to remove devices from the system's database.
Instructions for arming the system in various modes using NXG-1820 and NXG-183x keypads.
Instructions for disarming the system using NXG-1820 and NXG-183x keypads.
Explains how to activate the SOS feature using the NXG-1820 keypad.
Outlines the four primary methods for programming the xGenConnect system.
Provides steps to resolve issues with obtaining an IP address.
Guides on verifying the LAN connection status to the UltraSync service.
Details how to use the 4G/Wi-Fi module for dual-path reporting.
Instructions to verify the 4G connection status to the UltraSync service.
Introduces the UltraSync+ app for mobile control and programming.
Guides on connecting the xGenConnect system to the UltraSync+ mobile application.
Explains how to use the web server for common programming tasks.
Highlights essential settings to modify for security and proper operation.
Step-by-step guide for adding wireless zones to the system.
Instructions for adding, editing, and managing users within the xGenConnect system.
Guide on how to add keyfobs to the system for access control.
Explains different levels of access and custom programming for keyfobs.
Steps to add cameras using the new device setup wizard.
Instructions for adding cameras through the system settings.
Provides solutions for common camera connectivity and performance issues.
Lists common issues and solutions for troubleshooting notification problems.
Guide on how to add Z-Wave compliant devices to the system.
How to program a Z-Wave siren to activate with the xGenConnect siren.
Steps to remove Z-Wave devices from the system.
Process for adding xGenConnect as a secondary controller to an existing Z-Wave network.
Steps to remove xGenConnect when acting as a secondary controller.
Process for making xGenConnect the primary Z-Wave controller.
Steps to replace a Z-Wave device that has failed.
Linking Z-Wave devices to control each other or scenes.
Steps to remove a Z-Wave device that has failed.
Process to re-establish communication paths in the Z-Wave network.
To Next Page