SPOT
For applications requiring 3-way switching
(2
timers or timer
and 3-way switch) or reverse action applications. Reverse
action applications
allow
a load to
be
turned
"OFF"
for a
limited time, after which the load
will
switch back
"ON".
Three way applications are used for controlling a load from
two
different locations such
as:
• Hallways
• Corridors
• Self-storage Facilities
• Upper Level/Lower Level
NO
LOAD2
120
V.A.C.
LOAD 1
LINE 1
LINE2
3-Way
Switching
LOAD2
---<>
LOAD 1
LINE1
LINE2
Reverse
Action
Switching
DPST
For applications where both sides of a 208,
240
or 277 volt
load must
be
switched. Applications such
as:
• Large Horse Power Motors
• Pumps
• Indoor Lighting
• Outdoor Lighting
LOAD 1
LINE1
LOAD2
LINE 2
240
V.A.C.
To Next Page
Loading...
