Intermec CK3n - Configuring the CK3 for Your Network

Chapter 2 — Connecting and Configuring the CK3
28 CK3 Mobile Computer User’s Manual
For information about each command, see the Intermec Settings
Command Reference Manual (P/N 937-016-xxx).
Configuring the CK3 Remotely With SmartSystems
Foundation
Intermec’s SmartSystems Foundation lets you manage all of your
SmartSystems-enabled devices simultaneously from a central
location. The SmartSystems console displays all of the SmartSystems-
enabled devices in your network.
Your CK3 is SmartSystems-enabled, which lets you open Intermec
Settings from the SmartSystems console to remotely configure all of
your CK3 computers.
To open Intermec Settings from the SmartSystems console
1 In the SmartSystems console, right-click a CK3.
2 Select Intermec Settings.
For more information about SmartSystems Foundation, go to the
Intermec web site at www.intermec.com/SmartSystems.
Configuring the CK3 for Your Network
The CK3 is a versatile mobile computer that you can easily add to
your wireless or wired data collection network. You can connect your
CK3 using:
• 802.11b/g radio communications.
• Bluetooth communications.
Navigating in Intermec Settings
To Perform
This Action
Do This
Select a command. Tap the command or use the up and down arrow keys.
Expand a command. Tap the command or use the left and right arrow keys.
Select text in a text
box.
Tap in the text box and drag the stylus over the text.
Save your settings. Tap File > Save Settings or tap .