Chapter 2 — Connecting and Configuring the CK3
CK3 Mobile Computer User’s Manual 33
Connecting to a Bluetooth Audio Device
Use the Bluetooth Audio applet to discover, activate, and connect to
Bluetooth audio devices such as a Bluetooth headset.
To connect to a Bluetooth audio device
1 Select Start > Settings > the System tab > Bluetooth Audio. The
Bluetooth Audio screen appears.
2 Follow the onscreen instructions to connect to a Bluetooth audio
device.
Configuring Ethernet Communications
You connect your CK3 to your Ethernet network with an ethernet
cable and one of these accessories:
• AD20 single dock with an AA12 ethernet adapter
• AD21 ethernet multidock
To use your CK3 in an Ethernet network
1 Connect your CK3 to an ethernet network with an AD20 or AD21.
Ethernet communications is automatically enabled on your CK3.
2 Configure these network parameters:
• If you have a DHCP server, enable DHCP.
• If you do not have a DHCP server, set these parameters:
a IP address
b Subnet mask
To Next Page
Loading...
Need help?
General
