Chapter 2 — Connecting and Configuring the CK3
CK3 Mobile Computer User’s Manual 41
7 For 8021x, choose None and press Enter.
8 For Pre-Shared Key, enter the pre-shared key or passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the access point. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the CK3 internally converts it to a
pre-shared key.
This value must match the passphrase on the authenticator.
9 Save your settings and exit Intermec Settings.
Configuring 802.1x Security With Funk Security
1 Make sure the communications and radio parameters on your
CK3 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose Open and press Enter.
7 For Encryption, choose WEP and press Enter.
8 For Authentication, choose TTLS, PEAP, or TLS and press
Enter.
9 If you choose TTLS or PEAP:
a Tap User Name, enter your user name, and press Enter.
b Tap Password prompt, choose Enter password now, and
press Enter.
c Tap User Password, enter your password, and press Enter.
d For Validate Server Certificate, choose Yes and press Enter.
Note: You can use Password prompt to troubleshoot your
network connection.
To Next Page
Loading...
