Need help?Do you have a question about the Intermec CN4 and is the answer not in the manual?
General| Operating System | Windows Mobile 6.1 |
|---|---|
| Processor | Marvell PXA320 |
| RAM | 128 MB |
| Flash ROM | 256 MB |
| Touchscreen | Yes |
| Wireless LAN | 802.11b/g |
| Expansion Slots | SDIO |
| Durability | IP54 |
| Display Type | TFT |
| Display Resolution | 240 x 320 |
| Bluetooth | 2.0 |
| Cellular | GSM/GPRS/EDGE |
| GPS | Yes |
| Camera | 2 MP |
| Battery Type | Li-ion |
| I/O Ports | USB, Serial |
| Battery | 4000 mAh |
| Barcode Scanning | 1D/2D barcode scanner |
Emphasizes the importance of reading and following safety warnings and cautions.
Explains the types of batteries used by the CN4 and CN4e models.
Discusses the EA11 and EA21 area imagers and their capabilities for scanning.
Provides instructions for inserting miniSD and SIM cards into the CN4.
Guides on configuring the integrated GPS receiver and using the GPSID driver.
Explains Intermec's SmartSystems Foundation for managing devices from a central server.
Details how to connect the CN4 to a desktop PC using Microsoft ActiveSync.
Covers activating and configuring the CN4's cellular phone capabilities (CDMA, GSM/EDGE).
Explains setting up wireless security options like WPA2, WPA, 802.1x, and WEP.
Details methods for installing applications using SmartSystems, ActiveSync, miniSD, or FTP.
Provides contact information and required details for Intermec Product Support.
Lists common problems and their solutions for configuring and operating the CN4.
Explains how to perform warm, cold, and clean boots to reset the CN4.
To Next Page
