Forklift RFID System Installation Guide 11
Before You Install the Forklift RFID System
This guide assumes that a pre-sales team has already visited the
customer and determined the antennas, tags, and other basic
application parameters for the RFID system.
This guide also assumes that the person who is responsible for
installing the forklift RFID system is an installer who is
knowledgeable on how to modify forklifts. The installer is
responsible for contacting the forklift manufacturer or the vehicle
maintenance company to correctly identify the appropriate
power connections for the products.
Before you begin this installation, you should be familiar with
Intermec RFID products and basic RFID system terminology.
For help, see the Intermec RFID System Manual (P/N 936-000-
xxx).
Installing the Forklift RFID System
Each product comes with specific installation instructions as
noted in this procedure. For more information on other required
parts or tools, see the installation instructions for each product.
To install the forklift RFID system
1 Install the vehicle-mount computer and its power supply on
the forklift. For help, see the documentaiton that shipped
with the computer.
2 Mount the IV7 on the forklift load backrest, but do not
connect the power cable to power yet. For help using the
installation kit to install the IV7, see “Installing the IV7” on
page 12.
3 Continue installing the IV7 and connect it to the vehicle-
mount computer. For help, see the IV7 Vehicle-Mount Reader
Instructions.
Consult the vehicle manufacturer or your vehicle
maintenance company for specific information on
appropriate power connections and mounting
locations for this equipment.
To Next Page
Loading...
