Forklift RFID System Installation Guide 9
What Is a Forklift RFID System?
A forklift RFID system is a mobile RFID system that is installed
on a forklift. The RFID reader (IV7) moves to the RFID tag
locations, which differs from a conveyor system where the tags
move past a stationary reader.
Components of a Typical Forklift RFID System
• Intermec Vehicle-Mount Computer. For example, a CV60 or
a CV30.
• Intermec IV7 Vehicle-Mount RFID Reader with these cables:
• DC power cable kit for the IV7 (P/N 203-713-xxx)
• Appropriate data (serial) cable for the IV7 that connects it
to the vehicle-mount computer (P/N 236-089-001 or Kit
P/N 203-776-xxx). Other options may be available.
• RFID antennas (up to four) and appropriate cables
•RFID tags
About This Guide
This guide provides guidelines on how to use the parts in this
installation kit (P/N 203-769-001) to install the IV7 and its
RFID antennas on a forklift load backrest.
Note: Because forklifts, system locations, and other
equipment vary from place to place, much of the
information in this guide will need to be adapted to
your particular installation.
To Next Page
Loading...
