14 Forklift RFID System Installation Guide
5 Attach the bottom of the IV7 to the mounting strap you
secured in Step 4.
6 Attach caps to the ends of all U-bolts. You can use either the
smaller caps (if the ends are exposed) or the larger caps (if you
also need to cover the hex nut).
Installing the Antennas
The installation kit provides you with mounting straps, U-bolts,
self-locking hex nuts, and caps. These parts help you install the
RFID antennas on the forklift load backrest.
Installing an RFID Antenna: This illustration provides an example of how
you can install a smaller antenna to the forklift load backrest. Secure the
mounting strap on the side of the load backrest that is facing the driver (so
that the antenna faces the forks where the RFID tags will be).
To install the antennas
1 Study the previous illustration.
2 Attach the antenna to a mounting strap. If you are using a
larger antenna, you may need to use two mounting straps.
Cap
(4 places)
Antenna
Mounting strap
U-bolt
(2 places)
To Next Page
Loading...
