Intermec EasyCoder PC4 Supplementary Guide

The PC4 carrying case is a rugged accessory that provides a
convenient way to transport and store the PC4 printer. The
carrying case also provides easy access to the printer buttons,
connectors, and batteries to allow you to print labels while the
printer is in the carrying case.
PC4 Carrying Case Features
Use the carrying case to carry the printer, an extra battery, and
any accessories you may have purchased. The carrying case has a
battery pocket, an accessory pocket, and a sturdy shoulder strap
to make it easy for you to store and transport everything you
need for your printer.
Accessory
pocket
Shoulder
strap
Battery
pocket
Note: You must turn off the battery pack on the PC4 while
you are transporting it in the carrying case.
PC4 Carrying Case Instructions

Intermec EasyCoder PC4 Specifications

General

Resolution	203 dpi
Power Requirements	100-240 VAC, 50-60 Hz
Print Method	Direct Thermal
Max Print Width	4.09 inches (104 mm)
Max Print Speed	4 inches per second
Max Print Length	39 inches
Media Type	Roll-fed, die-cut, continuous, fanfold, tags, tickets
Media Width	1.0 - 4.65 inches
Media Thickness	0.06 mm (0.00236 in) to 0.18 mm (0.00708 in)
Interface	RS-232
Memory	4 MB Flash, 8 MB SDRAM
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	10 to 90% non-condensing