Need help?Do you have a question about the Intermec EasyCoder PD41 and is the answer not in the manual?
General| Print technology | Direct thermal |
|---|---|
| Maximum resolution | 203 x 203 DPI |
| Standard interfaces | RS-232, USB 2.0 |
| Internal memory | 16 MB |
| Power requirements | 100-240 VAC ±10%, 45-65 Hz |
| Media thickness | 2.3 - 9.8 mm |
| Maximum label width | 104 mm |
| Maximum label length | 0.15 m |
| Maximum roll diameter | 213 mm |
| Maximum internal memory | 1 GB |
| Supported network protocols | TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II |
| Operating temperature (T-T) | 40 - 104 °F |
| Operating relative humidity (H-H) | 20 - 85 % |
Weight and Dimensions| Depth | 453 mm |
|---|---|
| Width | 273 mm |
| Height | 270 mm |
| Weight | 13000 g |
To Previous Page