Intermec P30A/B

Appendix A — Specifications
IP30 Handheld RFID Reader User Guide 39
IP30A/IP30B RFID Specifications
* Maximum output power and operating frequency varies from country to
country based on the regulations.
** Read and write range varies based on tag performance, reader antenna
gain, reader output power, and environmental conditions.
IP30C RFID Specifications
* Maximum output power and operating frequency varies from country to
country based on the regulations.
** Read and write range varies based on tag performance, reader antenna
gain, reader output power, and environmental conditions.
Protocols supported EPCglobal Class 1 Gen 2
ISO 18000-6B
ISO 18000-6C
Frequency range
(region dependent)
U.S.A.: 902-928 MHz*
EU: 865.6-867.6 MHz
Output power
U.S. FCC: 902-928 MHz*
EU ETSI: 865-867 MHz*
Output power up to 30 dBm, depending
upon the model and the region where the
IP30 is configured to be used.
Read range (typical maximum) Up to 6 m (20 ft) or more dependent upon
the tag and power output setting.**
Write range (typical maximum) Typically, about 1/2 the read range, but it is
also dependent upon the tag and the power
output setting.
**
Protocols supported EPCglobal Class 1 Gen 2
ISO 18000-6B
ISO 18000-6C
Frequency range U.S.A.: 902-928 MHz*
EU: 865.6-867.6 MHz*
Output power
U.S. FCC: 902-928 MHz*
EU ETSI: 865-867 MHz*
Output power up to 30 dBm, depending
upon the model and the region where the
IP30 is configured to be used.
Read range (typical maximum) Over 6 m (20 ft) at 30 dBm**
Write range (typical maximum) Over 1.8 m (6.0 ft) at 30 dBm**