Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
24 PB21 and PB31 Mobile Receipt Printer User Guide
Changing Configuration Settings from the Display
You need to enter Setup mode before you can change configuration
settings. For more information on entering Setup mode, see
“Understanding Setup Mode” on page 20.
The top levels of the Setup menu are organized in a one-way loop.
Each level has several sub-levels.
Options in Extended Test Mode
Function Description
Select Media This option is almost the same as the process in Test
mode, except that the printer performs a slow test
feed in Extended Test mode. This enables the printer
to perform a slow sensor calibration which can help
resolve mark detection problems.
Test Labels This option allows you to print test labels one at a
time. Press to print the next label.
Dump Mode This options enters Dump mode. For more
information on Dump mode,
see “Troubleshooting
Communication Problems” on page 58.
Factory Default This option restores the factory default settings. Press
to select this option and then follow the
instructions on the screen.
Exit to Setup This option exits Extended Test mode and puts the
printer in Setup mode.
Exit This option exits Extended Test mode
To Next Page
Loading...
