Chapter 2 — Configuring the PB21 and PB31
PB21 and PB31 Mobile Receipt Printer User Guide 51
7 Type this command:
su -pass admin.
8 Type this command:
dlk -z.
The printer indicates that it is “Upgrading.”
9 In the communications program window, click Transfer > Send
File. A dialog box appears.
10 In the protocol drop-down box, select Zmodem.
11 Browse to the firmware (.bin) upgrade file and select it.
Wait approximately 5 minutes for the firmware upgrade to finish.
When the upgrade is complete, the communications program
displays the message, “kernal flashing ok.” The printer
automatically reboots.
Downloading Fonts and Graphics
The easiest way to download fonts and graphics is to use PrintSet. You
can download PrintSet from the downloads page for the printer on
the Intermec website at www.intermec.com. Follow the procedures
in the PrintSet online help to download fonts and graphics.
For help with Fingerprint, IPL, ESC/P, or SmartSystems commands
and information, see either the Intermec Fingerprint Command
Reference Manual, the Intermec Fingerprint Developer’s Guide, the
ESC/P Programmer’s Reference Manua
l, or SmartSystems online
help. You can download these documents from the Intermec website
at www.intermec.com.
To Next Page
Loading...
