Chapter 1 — Using the PF8 Printers
20 PF8d and PF8t Desktop Printer User’s Guide
Threading the Liner Inside the Peel-off Mechanism for PF8t
10 Hold the media and pull the liner until it is tight.
11 Close the self-strip mechanism.
12 On the PF8d, close the top cover. On the PF8t continue with
“Loading Thermal Transfer Ribbon (PF8t Only)” on page 27.
Print mechanism
Note: If you are loading media for the first time or changing from
another type or size of media, you need to adjust the label gap sensor.
For help, see “Adjusting the Label Gap Sensor” on page 58.
To Next Page
Loading...
