Chapter 1 — Using the PF8 Printers
PF8d and PF8t Desktop Printer User’s Guide 21
Loading Cut-Off Media
You can use the cutter option to cut non-perforated labels. For more
information, see “Accessories for the Printer” on page 74.
To load cut-off media
1 Press the cover open buttons on both sides, and open the cover.
You cannot use the cutter option to cut through labels, only
through the liner between the labels. Cutting through labels
causes the adhesive to stick to cutting parts and prevents the
cutter from working properly. You need to wind media rolls with
the printable side facing upward to prevent jamming the cutter.
To Next Page
Loading...
