Intermec PF8T User Manual

Appendix B — Default Settings
PF8d and PF8t Desktop Printer User’s Guide 77
COM Parameters
Parameter Default Value
Interface USB Device
USB keyboard US
Network Parameters
Parameter Default Value
IP Selection DHCP
IP Address N/A
Netmask N/A
Default router N/A
DHCP response N/A
MAC address N/A
Test/Service Parameters
Parameter Default Value
Testprint N/A
Data dump Off
Media Parameters
Parameter Default Value
Media type Gap
Paper type DT (Direct Thermal)
LBL dots 1200 dots
Darkness 12
LBL reset point 0
Form adjust dots X +0
Form adjust Y +0

Intermec PF8T Specifications

General

Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Core diameter	25.4 mm
Ribbon length	274.32 m
Maximum media length	1727 mm
Maximum roll diameter	127 mm
Supported paper width	118 mm
Maximum media length (imperial)	68 \
Supported paper width (imperial)	4.65 \
RS-232 ports	1
Standard interfaces	USB 2.0
Connectivity technology	Wired
Form factor	Desktop
Dimensions (WxDxH)	168 x 218 x 116 mm
Flash memory	4 MB
Certification	CE, FCC Class A, cULus, UL, GS, TUVGS, CCC, C-TICK, BSMI
Internal memory	8 MB
Built-in barcodes	MaxiCode, PDF417
Page description languages	EPL
Compatible operating systems	Windows 98/Me/2000/XP Pro/Server 2003/Vista
Storage temperature (T-T)	40 - 104 °F
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Power requirements	100–240 V AC/50–60 Hz, 1.9 A
AC adapter output current	3 A
AC adapter output voltage	24 V

Weight and Dimensions

Weight	2000 g