Co de 39
8
Beeps
The scanner emits these beeps to indicate either a successful
scan or a situation that requires your attention.
Beep Description
One medium beep A bar code has been read successfully
and you may scan another.
Two beeps (High, Low) A command bar code has been scanned.
Two medium beeps The scanner has been turned on.
Three medium beeps Indicates an error. For help, see
“Troubleshooting” later in this guide.
Electrical Rating
The Sabre 1551C laser scanner electrical ratings are
S
4,5 to
12V; 215 mA.
Ordering Cables
To order a cable, contact your local Intermec representative. Use
this table to determine which cable to order.
1551C020X
Reader/Terminal
Cable
Connector Length Part No.
DEC VT220/320/420 8 Pin Modular 6 ft (1.83m) 068414-050
Intermec 944X, 9430,
95XX
RJ11 Modular 6 ft (1.83m) 068414-011
Intermec 9465/9450,
J2050, JG2050
11 Pin Fisher 6 ft (1.83m) 068414-046
Intermec J2010,
JG2010, 97XX,
T242X, T246X,
T248X, 5020
10 Pin Modular 6 ft (1.83m) 068414-012
To Next Page
Loading...
