SG20B Charge Base Instructions 3
SG20B Charge Base Instructions
These instructions explain how to install and use the SG20B
charge base.
Connecting Power
You need one of the following cables sold and ordered separately:
• DC power supply (P/N 851-089-xxx), which requires a
country-specific power cord, or
• A standard USB cable
See the SG20B Charge Base Compliance Insert for use
restrictions associated with this product.
Note: The host USB port must deliver 500 mA to power the
charge base. If you have a message that the host does not
provide enough power use a different USB hub or disconnect
other USB devices.
To Next Page
Loading...
Need help?
General
