Intermec SG20T Quick Start Guide

SG
20T
Scanning a Bar Code
条形码扫描
掃描條碼
Lecture d’un code à barres
Scannen eines Barcodes
바코드 스캔
Leitura de código de barras
Сканирование штрих-кода
Escaneo de un código de barras
การสแกนบาร์โค้ด
Download EasySet® to Configure the SG20T:
下载EasySet©以配置SG20T:
下載 EasySet© 以組態 SG20T:
Téléchargez EasySet© pour configurer le SG20T:
EasySet© zur Konfiguration des SG20T herunterladen:
EasySet© 를 다운로드하여 SG20T 를 구성하십시오:
Baixe o EasySet© para configurar o SG20T:
Для конфигурирования SG20T загрузите EasySet©:
Descargue EasySet© para configurar el SG20T:
ดาวน์โหลด EasySet© เพื่อกำาหนดค่า SG20T
www.intermec.com/EasySet
Connecting the SG20T to a Host
将SG20T连接到主机
將 SG20T 連接到主機
Branchement du SG20T sur un hôte
Anschließen des Modells SG20T an einen Host
호스트에 SG20T 연결
Conexão do SG20T ao host
Соединение SG20T с хостом
Conexión del SG20T a un anfitrión
การเชื่อมต่อ SG20T กับโฮสต์

Intermec SG20T Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D
Optical sensor resolution	- pixels
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), Plessey, Telepen, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Product color	Gray
Built-in display	No
International Protection (IP) code	IP30
Input voltage	5 V
Power consumption	120 mA
Power source type	DC
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	200 mm
Width	61 mm
Height	65 mm
Weight	125 g