19
DANGER: If the boat is kept in saltwater, it is
recommended that the transducer be coated with an
anti-fouling paint. USE ONLY WATER BASED
ANTI-FOULING PAINT. DO NOT USE KETONE
BASED PAINTS. Ketone based anti-fouling paint
will attack the plastic materials used in the transducer.
See page 78 for recommendations.
Transducer
Wood or
Plastic
Fairing
Block (Add
sealing
compound
between
faring block
& hull).
Boat’s
Hull
Bronze Nut
OPTIONAL SPEED/TEMPERATURE
TRANSDUCERS
INTERPHASE DESCRIPTION
PART #
T1-0200-021 Transom mount S/T
transducer
T1-0200-027 Thru-hull mount S/T
transducer
04-0009-008 30’ Speed/Temp extension
cable
Both the transom and thru-hull S/T transducers are
separately installed. The transom mount S/T
transducer can be used with the thru-hull depth only
transducer if desired.
To order, call your local Interphase dealer, or
Interphase directly at (831) 477-4944.
To Next Page
Loading...
